transceiver test system specification sheet jfw model 50PMA-019 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com frequency range 800-3000 mhz configuration 11 port transceiver test system (see block diagram 092-6182) impedance 50 ohms nominal attenuation range 0-63 db in 1 db steps vswr 1.8:1 maximum attenuation accuracy (guaranteed monotonic) 0.75 db or 2.5% of programmed (whichever is greater) insertion loss 36 db maximum 27.5 db typical @ 800 mhz 31.5 db typical @ 3000 mhz power divider isolation 20 db minimum rf input power 1 watt average switching speed 5 microseconds (after command is received and processed) (3 milliseconds typical processing time) ac supply 100-240 vac @ 47-63 hz remote control ethernet (tcp, 10/100, up to 4 users) remote commands variable handover (vhnd av aw vx vy tz) fade attenuator (fax y z t) set attenuator (sax y) read attenuator (rax) pause (pausex) disconnect (dis) close (close) identification (idn) rf connector sma female operating temperature range 0oc to +50oc physical size see outline drawing 092-6181 05/14/2009 trs 05/14/2009 ecr/ecn # date rev appr / date ecr/ecn # dat e rev appr / date 17245 05/21/2009 a trs 05/21/2009 17601 08/25/2009 b trs 08/25/2009 jfw form e-7-f rev f page 1 of 1
|